Replacing The Band; Troubleshooting; My Step Count Does Not Seem Accurate; The Step Counts On My Device And My Garmin Connect Account Don't Match - Garmin vivofit 3 Owner's Manual

2 Use a small Phillips screwdriver to remove the four screws on the
front of the module.
3 Remove the cover and batteries.
EN
4 Insert the new batteries.
NOTE: Do not damage or lose the gasket.
5 Replace the front cover and the four screws.
6 Tighten the four screws equally and firmly.
7 Insert the module into the band.

Replacing the Band

Go to buy.garmin.com, or contact your Garmin dealer for information
about optional accessories.
1 Remove the module from the band.
2 Insert the device into the flexible silicone band by stretching the
band material around the device.
The arrow on the device must be aligned with the arrow inside the
band.
Owner's Manual

Troubleshooting

My step count does not seem accurate

If your step count does not seem accurate, you can try these tips.
• Wear the device on your non-dominant wrist.
• Carry the device in your pocket when pushing a stroller or lawn
mower.
• Carry the device in your pocket when actively using your hands or
arms only.
NOTE: The device may interpret some repetitive motions, such as
washing dishes, folding laundry, or clapping your hands, as steps.
The step counts on my device and my Garmin Connect
account don't match
The step count on your Garmin Connect account updates when you
synchronize your device.
1 Select an option:
• Synchronize your step count with the Garmin Connect application
(Syncing Your Data with Your Computer)
• Synchronize your step count with the Garmin Connect Mobile
(Syncing Your Data with the Garmin Connect Mobile App)
app
2 Wait while the device synchronizes your data.
Synchronizing can take several minutes.
NOTE: Refreshing the Garmin Connect Mobile app or the Garmin
Connect application does not synchronize your data or update your
step count.

My device does not display the correct time

The device updates the time and date when you synchronize your
device to a computer or mobile device. You should synchronize your
device to receive the correct time when you change time zones, and
to update for daylight saving time.
1 Confirm that your computer or mobile device displays the correct
local time.
2 Select an option:
• Synchronize your device to a computer
Your Computer)
.
• Synchronize your device to a mobile device
with the Garmin Connect Mobile App)
The time and date are updated automatically.
How do I pair a new device with an existing Garmin
Connect account?
If you have already paired another device with the Garmin Connect
Mobile app, you can add a new device from the app settings menu.
1 Open the Garmin Connect Mobile app.
2 From the settings menu, select Garmin Devices >
3 Follow the on-screen instructions.

I do not have a smartphone or computer

You can turn on the device and use it with limited functionality, until
you complete the setup process on a smartphone or computer. Prior
to setup, you can use only the step count, auto goal, and move bar.
Your device resets your step count once a day. The device attempts to
reset your step count while you are sleeping, based on your inactivity
level from your first day of use. Your device does not store any history
.
.
(Syncing Your Data with
(Syncing Your Data
.
.
8