Advertisement
Quick Links
Applications
What is the primary application for the Model 1058, 12.5 Mbps VDSL Ethernet Extender?
Used in pairs, the Model 1058 establishes a high-speed, line sharing, symmetrical 12.5 Mbps voice and data
link. The Model 1058 inter-connects two geographically separated LANs over a voice-grade twisted pair
wire. Operation is simple: packets destined for the remote LAN are sent transparently, at full line rate, to the
peered LAN. The Model 1058DV's built-in POTS/ISDN splitter allows users to simultaneously talk on the
phone while surfing the WWW, downloading files, or receiving emails.
Other Applications include:
MTU/MDU Internet Services
•
Network Backbones
•
Remote Workstations and Equipment
•
ISP Last Mile Extension
•
LAN Extension & Service Integration
1 1 1 1
FAQs
FAQs
FAQs
FAQs
Advertisement
Related Manuals for Patton electronics FAQs
Summary of Contents for Patton electronics FAQs
- Page 1 WWW, downloading files, or receiving emails. Other Applications include: MTU/MDU Internet Services • Network Backbones • Remote Workstations and Equipment • ISP Last Mile Extension • LAN Extension & Service Integration 1 1 1 1 FAQs FAQs FAQs FAQs...
- Page 2 *NOTE: Distances are based on a minimum to no cross talk environment. This distance table includes the potential 328ft (100 m) Ethernet connections on both ends of the communications link. Distance: Feet (km) 3856’ (1.18 km) 4656’ (1.42 km) 5256’ (1.60 km) 5556’ (1.69 km) 5756’ (1.75 km) 5856’ (1.78 km) 2 2 2 2 FAQs FAQs FAQs FAQs...
- Page 3 The built-in POTS/ISDN Splitter is a passive element and does not require power to operate. The POTS/ISDN port is able to provide a “life-line” telephone link provided the physical connection between the CO and CP VDSL modems is still intact. 3 3 3 3 FAQs FAQs FAQs FAQs...
- Page 4 Do I use straight-through or crossover cables? The 1058 is equipped with an MDI-X switch that enables automatic connections to a hub (DCE) or PC (DTE) interface, thereby eliminating confusion over whether a straight-through or crossover cable is needed. The Ethernet port will automatically sense the required connection type.