Using The Device; Applying The Arm Cuff - Omron M7 Intelli IT Instruction Manual

Hide thumbs Also See for M7 Intelli IT:
Table of Contents

Advertisement

3. Using the Device

Open both the front and rear covers to read the following:
The letter identifiers on the cover pages correspond to those in the body of this page.

3.1 Applying the Arm Cuff

Remove tight-fitting clothing from your left upper arm. Do not place the arm cuff over
thick clothing.
1.
Insert
N
2.
Apply the arm cuff to your left upper arm.
The bottom edge of the arm cuff should be
O
Cuff should be positioned on the upper arm with the air tube pointing towards
your hand.
3.
Securely close with the fabric fastener.
Notes:
• When you take a measurement on the right arm, the air tube will be at the side of your elbow. Be careful
not to rest your arm on the air tube. ---
• The blood pressure can differ between the right arm and the left arm, and the measured blood pressure
values can be different. OMRON recommends to always use the same arm for measurement. If the
values between both arms differ substantially, please check with your physician as to which arm to use
for your measurements.
the air plug into
b
the air jack securely.
J
1 to 2 cm above the elbow.
a
EN
13

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the M7 Intelli IT and is the answer not in the manual?

This manual is also suitable for:

Hem-7322t-e

Table of Contents

Save PDF