Preparation; Battery Installation - Omron M7 Intelli IT Instruction Manual

2. Preparation

2.1 Battery Installation

1.
Remove the battery cover.
2.
Insert 4 "AA" batteries as
indicated, into the battery
compartment.
3.
Replace the battery cover.
Notes:
• When the depleted battery symbol (
batteries. Replace with 4 new batteries at the same time. Long life alkaline batteries are recommended.
• After replacing batteries, "-/ - -:--" appears on the Date/Time display during or after measurement.
Before taking a first measurement, the monitor needs to be set with the correct date and time.
Measurements taken without date and time settings will not sync. For setting the date and time
manually, please refer to "To Set the Date and Time Manually" in section 2.2.
• The measurement values continue to be stored in memory even after the batteries are replaced.
• The supplied batteries may have a shorter life than new batteries.
Disposal of used batteries should be carried out in accordance with the national/local regulations for
the disposal of batteries.
8
) appears on the display, turn the monitor off and remove all the