Chrysler neon 1997 Service Manual page 1460

6785 BENCH FIXTURE GEARTRAIN BENCH 6785 FIXTURE 1–2 SHIFT FORK
PL
DISASSEMBLY AND ASSEMBLY (Continued)
Fig. 57 Bench Fixture
Fig. 58 Shift Rail Installation
Fig. 59 Shift Blocker Installation
(11) Position input and output bearings on the
shafts. Using Miller tool C-4992-1, press on input
and output shaft bearings until they bottom into the
case and against the shafts (Fig. 67).
BLOCKER SHIFT BENCH ASSEMBLY FIXTURE
Fig. 60 Reverse Brake Race Installation
Fig. 61 Reverse Brake Needle Bearing
Fig. 62 Reverse Brake Blocking Ring Installation
(12) Install shaft snap rings at input and output
bearings (Fig. 68).
(13) Apply Mopar RTV sealant to end–cover outer
edge and around bolt holes. Install end–cover onto
TRANSAXLE 21 - 17