General Information - Patton electronics 2025 User Manual

Thank you for your purchase of this Patton Electronics product.
This product has been thoroughly inspected and tested and is
warranted for One Year parts and labor. If any questions arise during
installation or use of the unit, contact Patton Electronics Technical
Support: (301) 975-1007; http://www.patton.com; or,
support@patton.com.
2.1 FEATURES
• Converts parallel data to serial data and vice versa
• Automatic parallel and serial sensing and selection
• Automatic DCE/DTE sensing and selection
• Serial data rates up to 38,400 bps
• No AC power required
• Supports both software and hardware flow control
• Ultra-miniature size
• A five-state LED monitors status and diagnostics
• Variety of connectors and cable lengths
• Made in USA
2.2 DESCRIPTION
The Patton Model 2025 Parallel to Serial Converters
automatically convert RS-232 serial data to parallel data format and
vice versa. Incorporating advanced microprocessor technology, the
Model 2025 is able to automatically sense and select parallel and serial
modes, as well as DTE/DCE modes. The Model 2025 requires no AC
power and supports serial data rates from 300 to 38,400 bps.
For easy configuration, the Model 2025 features a convenient set
of configuration switches. The configuration switches allow the user to
control baud rate, parity, word length and flow control. An easy-to-read
LED indicator displays status and operating condition.
Housed in an ultra-miniature ABS plastic case, the Model 2025
measures only 2.62" x 1.26" x .76". The Patton Model 2025 comes
equipped with a DB-25 female connector on the serial side, and a
Centronics 36 pin male connector on the parallel side. A six foot
integral cable is also included.

2.0 GENERAL INFORMATION

3