Electrical Requirements - Haier HMV1640 Installation Instructions Manual

ELECTRICAL REQUIREMENTS

Plug into a grounded 3 prong outlet.
Do not remove the ground prong from the power cord plug.
Do not use an adapter.
Do not use an extension cord.
Failure to do so can result in death, re or electrical shock.
Observe all governing codes and ordinances.
Product rating is 120 volts AC, 60 Hertz and 1550 watts. This product must be
connected to a supply circuit of the proper voltage and frequency.
The power supply cord and plug should be brought to a separate 15 to 20 ampere
branch circuit single grounded outlet.
The outlet box should be located in the cabinet above the microwave oven.
The outlet box and supply circuit should be installed by a qualified electrician and
conform to the National Electrical Code or the prevailing local code.
GROUNDING INSTRUCTIONS
For all cord connected
appliances:
The microwave oven must be
grounded. In the event of an
electrical short circuit, grounding
reduces the risk of electric
shock by providing an escape
wire for the electric current. The
microwave oven is equipped with
a cord having a grounding wire
with a grounding plug. The plug
must be plugged into an outlet
that is properly installed and
grounded.
SAVE THESE INSTRUCTIONS
WARNING
Electrical Shock Hazard
WARNING: Improper use of
the grounding plug can result
in a risk of electric shock.
Consult a qualified electrician
or serviceman if the grounding
instructions are not completely
understood, or if doubt exists as
to whether the microwave oven
is properly grounded.
Do not use an extension cord.
If the power supply cord is too
short, have a qualified electrician
or serviceman install an outlet
near the microwave oven.
5