Haier HMV1640 Installation Instructions Manual page 24

1. Thread the power cord through the hole in the bottom of the overhead cabinet.
Keep the power cord tight while mounting the oven.
NOTE: If the overhead cabinet is metal, use the nylon grommet around the
power cord hole to avoid cutting the power cord.
2. Using two or more people, lift the microwave, tilt it forward, and hook slots at
back bottom edge onto four lower tabs of mounting plate.
3. Rotate front of oven up against cabinet bottom.
4. Insert a self-aligning screw through top center cabinet hole. Temporarily secure
the oven by turning the screw at least two full turns after the threads have
engaged. (It will be completely tightened later.) Be sure to keep power cord tight.
Be careful not to pinch the cord, especially when mounting flush to bottom of
cabinet.
a
b
5. Attach the microwave oven to the overhead cabinet.
6. Insert two self-aligning screws through the outer top cabinet holes. Turn two full
turns on each screw.
22
c
d
e
f
a
Cabinet Front
b
Cabinet Bottom Shelf
c
Filler Block
d
Equivalent to Depth of
Cabinet Recess
e
Self-Aligning Screw
f
Microwave Oven Top