Table of Contents
Advertisement
Installing Microwave Oven
Unpacking Microwave Oven
1) Unpack the oven, remove all packing material, and examine
the oven any damage such as dents, broken door latches or
crocks in the door. Notify the dealer immediately if the unit is
damaged. Do not install the oven if the unit is damaged.
2) Inspect and remove any remains of packing, tape or printed
materials before powering the microwave oven.
Placement Microwave Oven
> The oven must be placed on a flat, stable surface.
> The oven may possibly cause reception interference on
the radios and/or televisions.
> In order to eliminate or minimize interference to radio and
televisions from the microwave oven, the oven should be
plugged into a separate electrical socket. In addition, the
oven should be physically as far away from the radios or
televisions as possible.
Proper Air Circulation
> For proper operation, the oven must have sufficient air-flow.
The following is recommended clearances around the oven:
Electrical Requirement
> Make sure there is suitable power outlet(120 Volt, 15 Amps
Outlet) with proper grounding to power the microwave oven.
> Avoid the use of three plug adapters or cutting off the third
grounding prong in order to accommodate a two-plug outlet.
This is a dangerous practice since it provides no effective
grounding for the microwave and may result in shock hazard.
> The electrical power cord must be kept dr y and must be not
pinched and crushed in any way.
Sides
Top
Back
2 " ( 5 0 m m )
1 " ( 2 5 m m )
1 " ( 2 5 m m )
7
Advertisement
Table of Contents
