Remote Access Code - VTech CM18245 User Manual

Answering system
Private mailbox setup
To play and select the default announcement:
1. When the deskset is idle, press ANS SYS.
2. Press or
3. Press or
/SELECT or /SKIP.
MENU
4. Press or
/SKIP.
/SELECT or /SKIP to choose Default. The default
5. Press
MENU
announcement plays.
SELECT or /SKIP to save the setting.
6. Press
MENU/

Remote access code

Use this code to select a three-digit number to allow remote access of the
answering system from another telephone. You can change the code to any
number from 000-999. This code is 000 by default.
1. When the deskset is idle, press ANS SYS.
2. Press or
/SELECT or /SKIP to choose Remote access.
3. Press
MENU
4. Use the dialing keys to enter a three-digit remote code.
Press DELETE to delete a digit.
•
Press /REPEAT or /SKIP to move the cursor to the left or right.
•
SELECT to save the setting and return to the previous menu.
5. Press
MENU/
To exit without making changes, press CANCEL.
to scroll to Settings, then press
to scroll to Mailbox On or Announce only, then press
to scroll to Anncment setup, then press
to scroll to Settings, then press
MENU
MENU
59
/SELECT or /SKIP.
SELECT or
MENU/
/SELECT or /SKIP.