Add And Register A Deskset - VTech CM18245 User Manual

Getting started

Add and register a deskset

You can add CM18245 desksets to the CM18445 console at any time, each
new deskset must be registered with the console before use.
The desksets are assigned with available extension numbers starting from 1
in ascending order (1 to 9). You can register a maximum of nine devices to the
console.
To register the deskset to the CM18445 console:
Start registration when the deskset shows
1) Press MENU on Console ->Registration ->Register
Ext. and 2) Press # on this extension to register.
alternately.
1. On the console, press MENU/
2. Press or
SELECT or /SKIP.
MENU/
SELECT or /SKIP to choose Register
3. Press
MENU/
ext. The console shows Registering....
4. On the deskset, press #. The deskset shows
Registering....
5. You hear a beep sound when the registration
process is successful. The deskset shows Deskset
X registered. (X represents the extension number,
ranged from 1 to 9). It takes up to 60 seconds to
complete the registration process.
6. Lift the handset. If you hear a dial tone, the registration
was successful.
NOTE: If the registration is not successful, the deskset returns to the
previous screen. Try the registration process again.
SELECT
to scroll to Registration, then press
.
8
1) Press MENU
on Console
->Registration
->Register Ext.
Registering...
Directory
Call log
Ringer setting
Console setup
Line mode
Ans sys setup
>Registration
Registration:
>Register ext
Deregistration
Deskset X
registered.