Dante Slot I/P Port List - Yamaha Tio1608-D Setup Manual

The diagram below is an example of a stagebox system including two
Tio1608-D racks, which is patched by Dante Controller. To output the SUB
OUT channel to the subwoofers, turn the "with OUTPUT" option OFF, and
change the output patching.
INPUT CH 17-32
AUX OUT 7-12
Ti o1608-D (ID: 2)
STEREO OUT L
SUB OUT
System example of patching the SUB OUT to Tio1608-D units

Dante slot I/P port list

When patching using the Dante Controller, refer to the list below, which
shows the corresponding TF Series I/O channels and slot I/O ports. The
port and connector numbers for both input and output match on the
Tio1608-D.
Channel
CH 1-32
CH 33-40
INPUT
STEREO IN L/R
DIRECT OUT 1-32
AUX OUT 1-20
MATRIX OUT 1-4
(V2.5 or later)
OUTPUT
STEREO OUT L/R
SUB OUT
MONITOR OUT
10
TF Series & Tio1608-D
INPUT CH 1-16
STEREO OUT R
TF3
Dante slot
TF5 TF3
SLOT IN 1-32
SLOT IN 33-40
SLOT IN 63, 64
SLOT OUT 1-32
SLOT OUT 33-52
SLOT OUT 53-56
SLOT OUT 57, 58
SLOT OUT 59
SLOT OUT 61, 62
www.yamahaproaudio.com
AUX OUT 1-6
Ti o1608-D (ID: 1)
SUB OUT
TF1
-