How To Confirm The Device Currently Linked - Mazda CX-3 Owner's Manual

NOTE
Some Bluetooth
a certain amount of time before the
" " symbol is displayed.
If a hands-free type mobile phone has
been the most recently paired device,
®
the Bluetooth
If you would like to use a Bluetooth
audio type device which has been
previously paired to the Bluetooth
unit, the link must be changed to this
device.
If an error occurs while trying to link
a device, " Err " fl ashes in the display
for three seconds, and the display
returns to " LINK CHANGE ". If this
occurs, check the pairing status of
®
the Bluetooth
location of the device in the vehicle
(not in the luggage compartment or a
metal-type box), and then try the link
operation again.
Device selection can also be done
using voice recognition.
How to confi rm the device currently
linked
Switch to the link-change mode. (Refer to
"Changing the link to a Bluetooth
device")
The device name displayed fi rst is the
device which is currently linked.
Deleting a device
1. Using the audio control dial, select the
pairing delete mode " PAIR DELETE "
in the " BT SETUP " mode. (Refer to
®
"Bluetooth audio device set-up" for
details.)
2. Press the audio control dial to
determine the mode.
®
audio devices need
unit links this device.
audio device and the
®
audio
3. The name of the fi rst device among the
paired devices is displayed.
4. Rotate the audio control dial and select
the name of the paired device you
would like to delete.
®
®
NOTE
Only the names of paired devices can
be displayed. If only one device is
paired, only the name for this device is
displayed.
5. If a selection other than " GO BACK "
is made and the audio control dial is
pressed, " SURE ? NO " is displayed.
6. Rotate the audio control dial clockwise
and switch the display to " SURE ?
YES ".
Interior Features
Bluetooth
Device name 1
Device name 2
Device name 3
Device name 4
Device name 5
Device name 6
Device name 7
5–101
®