How To Set The Speed - Mazda CX-3 Owner's Manual

How to Set the Speed

1. Adjust the vehicle speed to the desired
setting using the accelerator pedal.
2. Headway control begins when the
SET or SET switch is pressed. The
set speed and the inter-vehicle distance
display fi lled with white lines are
displayed. The Mazda Radar Cruise
Control (MRCC) indicator light (green)
is indicated simultaneously.
Travel status
During travel at constant
speed
During travel under
headway control
Display
i-ACTIVSENSE
NOTE
If a vehicle ahead is detected while
travelling at a constant speed, the
vehicle-ahead indication is displayed
and headway control is performed.
Additionally, when a vehicle ahead is
no longer detected, the vehicle-ahead
indication turns off and the system
switches back to travel at constant
speed.
If you are driving the vehicle at
a speed faster than the set speed,
headway control on the vehicle ahead
is not possible Adjust the system to
the desired vehicle speed using the
accelerator pedal.
(European models)
When switching to a passing lane and
operating the direction indicator, the
system provides more acceleration
automatically if it determines that
more acceleration is required. Drive
while being careful of the road ahead
because you could approach the
vehicle ahead too closely.
When Driving
4–129