Mazda CX-3 Owner's Manual page 646

Specifi cations
Personalisation Features
Item
Ending
Fuel
display
Economy
Monitor
Refer
to Fuel
Economy
Fuel
Monitor on
economy
page 4-88 .
resetting
procedure
Active
driving
display
Refer to Turn-by-
Active Turn (TBT)
Driving
Display on
page 4-34 .
*1 Though these systems can be turned Off, doing so will defeat the purpose of the system and Mazda recommends
that these systems remain On.
*2 For vehicles with an audio system other than the on-screen function type, the warning sound cannot be changed.
The warning sound is only a beep.
*3 Only the volume of the warning beep during Blind Spot Monitoring (BSM) operation can be changed. The
volume of the warning beep during Rear Cross Traffi c Alert (RCTA) operation cannot be changed.
*4 If the auto-wiper control is set to Off, the wiper lever
*5 Available only in display from the centre display.
9–20
Feature
Setting can be changed
so that the ending
display of the Fuel
Economy Monitor is
displayed.
Setting can be changed
so that the fuel
economy reset is linked
with the trip meter
reset.
Setting can be changed
so that the Turn-by-
Turn (TBT) of the
Active driving display
is not displayed.
Factory Available
Setting Settings
Off On/Off
Off On/Off
On On/Off
position is set to intermittent operation.
Settings change method
Refer
to Fuel
—
Economy
Monitor
on page
4-88 .
Refer
to Fuel
—
Economy
Monitor
on page
4-88 .
Refer to
Active
—
Driving
Display
on page
4-34 .