Replacing The Fuses Under The Bonnet - Mazda CX-3 Owner's Manual

Hide thumbs Also See for CX-3:

Table of Contents

3. Pull the fuse straight out with the

fuse puller provided on the fuse block

located in the engine compartment.

4. Inspect the fuse and replace it if it is

5. Insert a new fuse of the same amperage

rating, and make sure it ﬁ ts tightly. If

it does not ﬁ t tightly, have an expert

install it. We recommend an Authorised

Mazda Repairer.

If you have no spare fuses, borrow one

of the same rating from a circuit not

essential to vehicle operation, such as

the AUDIO or OUTLET circuit.

Always replace a fuse with a genuine

Mazda fuse or equivalent of the same

rating. Otherwise you may damage the

electric system.

6. Reinstall the cover and make sure that

it is securely installed.

Owner Maintenance

Replacing the fuses under the bonnet

If the headlights or other electrical

components do not work and the fuses

in the cabin are normal, inspect the fuse

block under the bonnet. If a fuse is blown,

it must be replaced. Follow these steps:

1. Make sure the ignition is switched off,

and other switches are off.

2. Remove the fuse block cover.

3. If any fuse but the MAIN fuse is

blown, replace it with a new one of the

same amperage rating .

Maintenance and Care

Show Quick Links

Table of Contents