Charging The Battery Pack - Sanyo w41sa Basic Manual

Charging the Battery Pack

The battery pack is not fully charged at the time of purchase.
When you use the W41SA for the first time, charge the battery pack.
How to Charge the Battery Pack
Connect the Common AC Adapter 01 to the Desktop Holder.
Check the pin configuration and orientation of the connector before
connecting the adapter.
Plug the power plug of the Common AC Adapter 01 into an AC outlet.
Attach the W41SA phone in which the battery pack is
installed to the Desktop Holder.
To detach, hold down the Desktop Holder and detach the W41SA phone.
AC outlet
Common AC Adapter
01 (sold separately)
• The cellphone beeps and the Incoming illuminator lights red. → Charging in progress.
• The cellphone beeps and the Incoming illuminator turns off. → Charging
completed.
Information
• The battery pack can also be charged by directly
inserting the Common AC Adapter 01 (sold
separately) connector into the external connector on
the W41SA phone.
• Please be forewarned that the actual figures may differ
from the illustrations depending on your AC adapter.
Incoming Illuminator
(Light is red.)
Desktop
Holder
①
②
13