Charging the Battery Pack
The battery pack is not fully charged at the time of purchase.
Charge the battery pack before using your W63SA for the first time.
How to Charge the Battery Pack
■
1
Connect the Common AC Adapter 02 to Desktop holder.
2
Plug the power plug of the Common AC Adapter 02 into
an AC outlet.
3
Place the W63SA with the battery pack attached on
Desktop holder, as illustrated below.
Common AC Adapter 02
(not included in the package)
• The cellphone beeps and the incoming illuminator lights red.
• The cellphone beeps and the incoming illuminator turns off.
Information
The battery pack can also be charged by
•
directly inserting the Common AC Adapter
02 connector (not included in the package)
into the external connector on the W63SA.
Note that the actual figures may differ from the
•
illustrations depending on your AC adapter.
12
Check the pin configuration and orientation of the connector
and connect it horizontally.
Hold Desktop holder to detach the W63SA.
AC outlet
Incoming Illuminator
(Light is red.)
Desktop Holder
Charging is in progress.
Charging is completed.
①
②