Table of Contents
Advertisement
Charging the Battery Pack
The battery pack is not fully charged at the time of purchase.
Charge the battery pack before using your W43SA for the first time.
How to Charge the Battery Pack
■
1
Connect the Common AC Adapter 01 to Desktop holder.
2
Plug the power plug of the Common AC Adapter 01 into an AC outlet.
3
Place the W43SA with the battery pack attached on
Desktop holder, as illustrated below.
AC outlet
Common AC Adapter
01 (not included in
the package)
• The cellphone beeps and the charge illuminator lights red.
• The cellphone beeps and the charge illuminator turns off.
Information
The battery pack can also be charged by directly
•
inserting the Common AC Adapter 01 connector (not
included in the package) into the external connector
on the W43SA.
Note that the actual figures may differ from the
•
illustrations depending on your AC adapter.
12
Check the pin configuration and orientation of the connector and
connect it horizontally.
Hold Desktop holder to detach the W43SA.
Charge Illuminator
(Light is red.)
Desktop Holder
Charging is in progress.
Charging is completed.
①
②
Advertisement
Table of Contents
