Charging The Battery Pack - Sanyo W61SA User Manual

Charging the Battery Pack

The battery pack is not fully charged at the time of purchase.
Charge the battery pack before using your W61SA for the first time.
How to Charge the Battery Pack
■
1
Connect the Common AC Adapter 01/02 to Desktop holder.
2
Plug the power plug of the Common AC Adapter 01/02
into an AC outlet.
3
Place the W61SA with the battery pack attached on
Desktop holder, as illustrated below.
AC outlet
Common AC Adapter
01 (not included in
the package)
• The cellphone beeps and the incoming illuminator lights red.
• The cellphone beeps and the incoming illuminator turns off.
Information
The battery pack can also be charged by
•
directly inserting the Common AC Adapter
01/02 connector (not included in the package)
into the external connector on the W61SA.
Note that the actual figures may differ from the
•
illustrations depending on your AC adapter.
12
Check the pin configuration and orientation of the connector
and connect it horizontally.
Hold Desktop holder to detach the W61SA.
Incoming Illuminator
(Light is red.)
Desktop Holder
Charging is in progress.
Charging is completed.
①
②