In Case You Lose Your W41Sa; Setting The Remote Auto Lock Activation Conditions - Sanyo w41sa Basic Manual

In Case You Lose Your W41SA

The Remote Auto Lock function enables you to lock your W41SA through remote
operation so that no one else can use your W41SA.

Setting the Remote Auto Lock Activation Conditions

Making several incoming calls to the W41SA from the registered phone number
within the specified time activates Auto Lock.
Press c (MainMenu)
while the standby screen
is displayed and press
413.
Press j to select "ON" and press c (Set). Enter
your Lock No. and press c.
Lock No. is set to "1234" at the time of purchase.
Use j to select "Valid No. List" and press c (Select).
Use j to select "Register New" and press c (Select).
Press j to select "Direct Entry" and press c (OK).
Enter a phone number and press c (OK).
You can also select "Use Address Book" to enter phone numbers.
Up to 3 phone numbers can be registered.
Press Z (Comp).
86
Ｍ４１３
Ｒｅｍｏｔｅ ＡｕｔｏＬｏｃｋ
ＯＮ
ＯＦＦ
Ｌｏｃｋｓ／Ｕｎｌｏｃｋｓ Ｐｈｏｎｅ
ｂｙ Ｒｅｍｏｔｅ Ｃｏｎｔｒｏｌ
Ｗｈｅｎ Ｌｏｓｔ， ｅｔｃ． Ｏｒ
Ｓｅｔｓ ｔｏ Ｅｒａｓｅ Ｄａｔａ
ａｔ ｔｈｅ Ｓａｍｅ Ｔｉｍｅ
Ｓｅｔ Ｇｕｉｄｅ