Delivered Items; For Your Safety; Product Features - Bosch ake 30 s Original Instruction

F 016 L70 540.book Seite 4 Freitag, 12. Februar 2010 11:19 11

Delivered Items

Carefully remove the machine from its packaging
and check for complete contents:
– Chain saw
– Cover plate
– Chain
– Chain bar
– Oil filler cap
– Chain guard
– Operating instructions
When parts are missing or damaged, please contact your
dealer.

Product Features

1 Rear handle
2 On/Off switch
3 Safety lock
4 Oil filler cap
5 Activation lever for kickback brake (hand guard)
6 Front handle
7 Nose sprocket (AKE 35/40 S only)
8 Chain guard
9 Chain
10 Chain bar
11 Gripping teeth
12 Locking knob
13 Cover plate
14 Chain tensioning knob
15 Power supply cable*
16 Mains plug**
17 Serial Number
18 Chain catch bolt
19 Drive sprocket
20 Fastening bolt
21 Symbol for rotation and cutting direction
22 Oil outlet
23 Guide fins for chain bar
24 Chain tensioning peg
25 Oil-level indicator
26 Ventilation slots
**Country specific
*Not all of the accessories illustrated or described are
included as standard delivery.
21 • F 016 L70 540 • 10.02

For Your Safety

Warning! Switch off, remove plug from mains
before adjusting cleaning or if the cable is cut,
damaged or entangled.
Caution! Do not touch rotating chain.
Do not operate chain saw near other people,
children or animals. Do not operate chain saw
after drinking alcohol or under the influence of
intoxicating drugs or medication.
Electrical Safety
Your machine is double insulated for safety and re-
quires no earth connection. The operating voltage is
230 V AC, 50 Hz (for non-EU countries 220 V,
240 V as applicable). Only use approved extension
cables. Extension cords/leads should only be used
if they comply
(60227 IEC 53).
If you want to use an extension cable when operat-
ing your product, only the following cable dimen-
sions should be used:
2
– 1.0 mm : max length 40 m
2
– 1.5 mm : max length 60 m
2
– 2.5 mm : max length 100 m
It is recommended for increased electrical safety to
use a Residual Current Device (RCD) with a tripping
current of not more than 30 mA. Always check your
RCD every time you use it.
For products not sold in GB:
WARNING: For safety, it is essential that the mains
plug 16 attached to the machine is fitted to the power
supply cable 15 as shown.
The couplings of connection leads must be pro-
tected against splashes and the coupling sockets on
the leads must be made of rubber or coated with rub-
ber.
Fixing means for the connection leads must be used.
The connection lead must be inspected for signs of
damage at regular intervals and may only be used if
in perfect condition.
If the supply cord is damaged, it must be replaced by
a Bosch Service Centre.
Products sold in GB only: Your chain saw is fitted
with an approved 13 A (BS 1363/A) electric plug and
is protected by a 13 A fuse (ASTA Approved to
BS 1362).
If the fitted plug is not suitable for your socket out-
lets, it should be cut off and an appropriate plug fitted
in its place by an authorized customer service agent.
The severed plug must be disposed of to avoid a
possible shock hazard and should never be inserted
into a 13 A socket elsewhere.
English - 4
with H07-F types or IEC