Product Specification; Intended Use; Operating Controls; Delivered Items - Bosch AKE 30 S Operating Instructions Manual

F016 L70 495.book Seite 3 Dienstag, 19. Dezember 2006 3:13 15

Product Specification

Chain saw
Part number (typ)
Rated power
Chain speed (no load)
Chain bar length
Tool-less chain tensioning (SDS)
Nose sprocket
Kickback Brake
Chain type
Drive link thickness
Amount of drive links
Oil reservoir capacity
Automatic oiler
Metal gripping teeth
Weight without mains cable. approx. **
Protection class
**measured with chain bar and chain
Note: Please observe the order number of your machine. The trade names of individual machines can vary.
Inrush currents cause short-time voltage drops. Under unfavourable power supply conditions, other equipment may be af-
fected. If the system impedance of the power supply is lower than 0,25 Ohm, disturbances are unlikely to occur.

Intended Use

The chain saw is intended for sawing of trees, tree
trunks, branches, wooden beams, planks, etc. Cuts
can be sawed with or across the grain. This product
is not suitable for sawing mineral materials.
Introduction
This manual gives instructions on the correct as-
sembly and safe use of your chain saw. It is impor-
tant that you read these instructions carefully.

Delivered Items

Carefully remove the machine from its packaging
and check for complete contents:
– Chain saw
– Cover plate
– Chain
– Chain bar
– Chain guard
– Chain oil (80 ml)
– Operating instructions
When parts are missing or damaged, please contact your
dealer.
1 • F016 L70 495 • TMS • 19.12.06
AKE 30 S AKE 35 S
3 600 H34 1.. 3 600 H34 1..
[W] 1700 1700
[m/s] 9 9
[cm] 30 35
–
3/8" - 90 3/8" - 90
[mm] 1.1 (0.043") 1.1 (0.043")
45 52
[ml] 200 200
[kg] 3.9 4.0
/ II

Operating Controls

A
1 Rear handle
2 On/Off switch
3 Lock-off button
4 Oil filler cap
5 Activation lever for kickback brake (hand guard)
6 Front handle
7 Nose sprocket (AKE 35/40 only)
8 Chain guard
9 Chain
10 Chain bar
11 Gripping teeth
12 Locking knob
13 Cover plate
14 Chain tensioning knob
15 Fastening bolt
16 Chain tensioning peg
17 Guide fins for chain bar
18 Oil outlet
19 Symbol for rotation and cutting direction
20 Drive sprocket
21 Chain catch bolt
22 Mains plug**
23 Serial Number
**Country specific
Not all of the accessories illustrated or described are
included as standard delivery.
English - 3
AKE 40 S
3 600 H34 1..
1700
9
40
3/8" - 90
1.1 (0.043")
57
200
4.1
/ II / II