Table of Contents
Advertisement
When using a Model 2110, in conjunction with a PoE Switch, the user
extends the 802.3af PoE and 10/100 Ethernet an additional 100 meters
(328ft). POE-enabled IP Cameras can be placed 200 feet away from the
Ethernet switch and can be powered up via PoE by the 2110. (See
Appendix A.6 on page 11 for power and distance specifications).
CAUTION
To install the 2110 PoE Booster, do the following:
1. Connect the Ethernet interface (refer to section 3.1, "Connecting the
POE and 10/100Base-T Ethernet Interface" on page 8).
2. EUI Models only: Connect the power plug (refer to section 3.2, "Con-
necting Power (EUI Models)" on page 9).
Figure 1. Typical application
3.0 INSTALLATION
If used externally, interconnecting cables shall be rated
for the proper application with respect to voltage, cur-
rent, anticipated temperature, flammability, and
mechanical serviceability.
7
Advertisement
Table of Contents
