Table of Contents
Advertisement
The pair of 1173Rs work together to create a transparent extension
between an IP camera and Ethernet LANs. Figure 1 shows a typical point-
to-point application.
CAUTION
To install the 1173R Camera Extender, do the following:
1. Connect the line interface between the units (refer to section 3.1,
"Connecting the Twisted-Pair Line Interface" on page 9)
Note
See Figure 2 for the standalone unit's rear panel arrangements.
2. Connect the Ethernet interface (refer to section 3.2, "Connecting the
10/100Base-T Ethernet Interface" on page 11).
3. Connect the power plug (refer to section 3.3, "Connecting Power" on
page 11).
Figure 1. Typical application
3.0 INSTALLATION
The Interconnecting cables shall be acceptable for
external use and shall be rated for the proper applica-
tion with respect to voltage, current, anticipated tem-
perature, flammability, and mechanical serviceability.
8
Advertisement
Table of Contents
