Service; Safety When Working With Electricity - Patton electronics CopperLink Ethernet Booster 2110 User Manual

Patton electronics copperlink ethernet booster user manual
Table of Contents

Advertisement

1.5 SERVICE

All warranty and non-warranty repairs must be returned freight prepaid
and insured to Patton Electronics. All returns must have a Return Materi-
als Authorization number on the outside of the shipping container. This
number may be obtained from Patton Electronics Technical Services at:
• Tel: +1 (301) 975-1007
• Email: support@patton.com
• URL: http://www.patton.com
Note
Packages received without an RMA number will not be
accepted.

1.6 SAFETY WHEN WORKING WITH ELECTRICITY

WARNING
• This device contains no user serviceable parts. The
equipment shall be returned to Patton Electronics for
repairs, or repaired by qualified service personnel.
• For units with an external power adapter, the adapter
shall be a listed Limited Power Source (LPS). The
power cable used shall meet all applicable standards
for the country in which it is to be installed.
• Hazardous network voltages are present in WAN ports
regardless of whether power to the unit is ON or OFF. To
avoid electric shock, use caution when near WAN ports.
When detaching the cables, detach the end away from
the device first.
• Do not work on the system or connect or disconnect
cables during periods of lightning activity.
In accordance with the requirements of council direc-
tive 2002/96/EC on Waste of Electrical and Electronic
Equipment (WEEE), ensure that at end-of-life you sepa-
rate this product from other waste and scrap and deliver
to the WEEE collection system in your country for recy-
cling.
5

Advertisement

Table of Contents
loading

Table of Contents