Download Print this page

Advertisement

Quick Links

REFRIGERATOR-FREEZER
Model: FF.567L.SB.ICE

Advertisement

loading
Need help?

Need help?

Do you have a question about the FF.567L.SB.ICE and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Midea FF.567L.SB.ICE

  • Page 1 REFRIGERATOR-FREEZER Model: FF.567L.SB.ICE...
  • Page 5 Before adjusting the height of the door, rotate the downward adjusting nut clockwise (as shown in Figure I) for 2 circles with a wrench, and loosen the downward adjusting nut. Rotate the upward adjusting nut (as shown in Figure I) to adjust the height, and then tighten the downward Left adjusting nut counterclockwise again.
  • Page 8: Refrigerator Compartment

    Refrigerator compartment...
  • Page 10: Ice Maker

    Operation and precautions for ice maker Note: Connection of water pipes: please contact the after-sales Service Department of the Company or professionals to install to avoid any risk. Warning! The water pipes must be connected under the condition of power-off. Electric shock may cause serious injury or death.
  • Page 12 [Way to replace the filter] 1.The filter installed in this refrigeratory is refined by NSF42, which can filter the smell, chlorine and so on in running water. 2.The replacement cycle of the filter is about 6 mouths. When replacement is needed, the indicator on the display board will turn on.
  • Page 13 See the following figure for keys and display configuration of man-machine interface (Operation interface is subject to material object) Display Control Power on the display panel to reach full display after 3s, the start-up tone rings and the panel displays the systemic memory mode and temperature settings.
  • Page 14 ℃ Super Cooling mode: Refrigerating chamber is operating upon the temperature setting of 2 ; the Super Cooling mode will exit automatically after operation for 150min . Then, refrigerating chamber restores to the original temperature setting. (Power off and then on, Super-cooling mode exits) After that, the set temperature ℃...
  • Page 16 Replacement on lights in freezer and refrigerator, and specification of lights Specification: direct current 12V, LED refrigerator lamp Refrigerator lamp replacement Shut off the power As per the photo, remove the shade along the driver direction of the arrow, and then tighten the screws, remove the LED lights;...
  • Page 18 Energy Saving Tips · The appliance should be located in the coolest area of the room, away from heat producing appliances or heating ducts, and out of the direct sunlight. · Let hot foods cool to room temperature before placing in the appliance. Overloading the appliance forces the compressor to run longer.