Esc Ixp2 Specify Print Start Command Text String - Brother PT-P900W Software Manual

ESC iXP2 Specify print start command text string

ASCII: ESC
Decimal: 27
Hexadecimal: 1B
Parameters
01h≤nh1≤14h
nh2: 00h (Fixed)
00h≤datah≤FFh
Description
 Specifies the text string for the print start command.
nh1+(nh2*256): Length of the text string (can be set between 1 and 20)
data:
 The default text string for the print start command is "^FF".
 This command is a static command.
Remarks
 Invalid if more than 20 characters are specified
Example
 To change the text string for the print start command to "START":
Since the text string to be specified (data), "START", contains 5 characters, nh1=05h and nh2=00h.
Therefore, the command will be as follows.
ESC i X P 2 05h 00h S T A R T
(1Bh 69h 58h 50h 32h 05h 00h 53h 54h 41h 52h 54h)
i X P 2
105 88 80 50 nd1 nd2 datad
69 58 50 32 nh1 nh2 datah
Text string (The maximum number of characters that can be set is 20 characters
(bytes).)
n1 n2 data
- 68 -
P-touch Template Command Reference
7. Control Command Details