Cc Change The Prefix Character - Brother PT-P900W Software Manual

^CC Change the prefix character
ASCII: ^
Decimal: 94
Hexadecimal: 5E
Parameters
00h≤nh≤FFh
Description
 Changes the prefix character code.
n: Character code
 The default text string for the prefix character is "^".
 This command is a dynamic command.
Example
 To change the prefix character from "^" to "_", send the command shown below.
^ C C 5Fh
(5Eh 43h 43h 5Fh) (5Fh stands for "_" in ASCII code)
 However, since the prefix character remains set to "_" if the machine is not later turned off, then on, the
initialize command, for example, will be "_II" instead of "^II".
C C n
67 67 nd
43 43 nh
- 41 -
P-touch Template Command Reference
7. Control Command Details