Brother PT-P900W Software Manual page 12

(6) Print start data amount setting
The amount of data that must be received before printing can begin can be set between 1 and 999.
(7) Character code set setting
Select one of the following three character codes. For details on the character code tables,
refer to the character code tables in the P-touch Template Command Reference.
Windows 1252
Windows 1250
Brother standard
(8) International character setting
Select one of the following as the character set of the country.
- USA
- France
- Germany
- UK
- Denmark
- Sweden
- Italy
- Spain
- Japan
- Norway
- Denmark II
- Spain II
- Latin America
- Korea
- Legal
The following 12 codes are switched depending on the country selected from those listed above.
23h 24h 40h 5Bh 5Ch 5Dh 5Eh 60h 7Bh 7Ch 7Dh 7Eh
For the characters that are switched, refer to
Character Code Tables".
(9) Prefix character setting
Change the prefix character code. Specify as a one-character character code.
The prefix character is the code for the first character that identifies commands that can be used in
P-touch Template mode.
the"International character set
- 6 -
2. P-touch Template Settings Tool User's Guide
P-touch Template Command Reference
table"in "Appendix B: