Using P-Touch Template - Brother PT-P900W Software Manual

1. Using P-touch Template

(1) Set up the printer.
Using the P-touch Template Settings tool, specify the initial
printer settings according to the host system environment
or the host that the printer is connected to.
(Please refer to "2. P-touch Template Settings Tool User's
Guide" )
The printer driver must first be installed via a USB
connection.
(2) Design the template.
Using P-touch Editor, design the template to be transferred
to the printer.
(Please refer to "4. P-touch Template
(3) Transfer the templates.
Using P-touch Transfer Manager, transfer the templates to
the printer.
(Please refer to the PT-900 Series Software User's Guide.)
(4) Program using P-touch Template commands.
If any special commands are required to control the printer,
change the terminal program in accordance with the
P-touch Template commands.
(Please refer to "6. Control Code
(5) Connect the printer with the host and print slips etc.
Connect the printer to the host device by using a serial
cable (RS-232C) or USB-A cable.
Transfer the data, such as ASCII text, from the host device
to templates on the machine, and print the labels
Limitations")
Lists")
- 3 -
P-touch Template Command Reference
1. Using P-touch Template