Brother PT-P900W Software Manual page 14

(17) Cut number setting
A number between 1 and 99 can be specified.
(18) Chain printing setting
Specifies chain printing. If the check box is selected, chain printing is enabled, and the tape is not fed or
automatically cut after the last label is printed. If the check box is cleared, chain printing is disabled, and
the tape is fed and automatically cut after the last label is printed.
(19) Mirror printing setting
Specifies mirror printing. If the check box is selected, mirror printing is enabled. If the check box is cleared,
mirror printing is disabled.
(20) Communication settings
Settings can be specified for the following parameters for serial communication.
Baud rate
Bit length (bits)
Parity
Busy control
Applies the four settings to the printer.
115200 bps, 57600 bps, 38400 bps, 31250 bps, 28800 bps, 19200 bps, 14400
bps, 9600 bps, 4800 bps, 2400 bps, 1200 bps, 600 bps
8 bit, 7 bit
None, Odd, Even
DTR, XON/XOFF
Closes the Communication
Settings dialog box.
- 8 -
Returns the four parameters to
their default settings.
2. P-touch Template Settings Tool User's Guide
P-touch Template Command Reference