Changing The Mb-8N Settings - Sony MB-8N User Manual

Changing the MB-8N Settings

18
1
In the tree display, click on the icon or host name shown to the right of
the icon for the MB-8N you want to change.
The MB-8N settings appear in the detailed settings window.
2
Change the settings of the following items as required.
Lv (audio output level setting): Click the button for each slot, to
select one of Line (–20 dBm), Mic (–58 dBm), and OFF.
Phone (headphone output setting): Click the button, to select one of
L, R, and LR.
ANT ATT (antenna RF attenuation setting): Click the down arrow
button for each of A and B to display the list, and select one of 0
dB, 5 dB, 10 dB, and 15 dB.
ANT POWER (antenna power feed setting): When there is a check
mark in the check box, 9 V DC is supplied from the ANTENNA
A, B IN/DC 9V OUT connectors on the rear panel of the MB-8N.
(Set this on for an AN-820 or other antenna requiring a power
feed.)
For more details of the settings, see page 15.
Note
When you change the settings, even when the indications change the
settings are still not effective.
To change the settings, be sure to carry out step 3.
3
Click the SET button.
This enables the changed settings.
To display the latest state, click the Check button.
Error messages
When the network is congested, making settings with this software may
result in the following error message. In this case, click OK, then repeat
the operation.