Table of Contents
Advertisement
4
5
6
Changing the recording level
You can change the recording level setting of a track.
Notes
• The recording level of a track that was recorded in an LP mode (LP2 or LP4)
• While this dialog box is displayed, the MD cannot be operated by the system
Before you begin
Please note that it is impossible to undo the results of this MD edit
operation.
1
2
74
Adjust the fade-out starting and ending points in three steps.
1 Drag
in Start Point to roughly locate the starting point.
2 Drag
in Rate to fine-tune the starting point.
3 Click
or
to adjust the position in increments of 0.1-second
within a range of 1 to 15 seconds..
Set the fade-out curve type.
Select Curve1, Curve2, or Curve3.
When the adjustment is completed, click
Updating of the track begins.
cannot be changed.
stereo component.
Open the MD window (page 14).
Select the track in the Track Name display in the MD window
whose recording level you want to change.
.
Advertisement
Table of Contents
