Monitor Function; Assigning Wru-8N Units - Sony MB-8N User Manual

Network controller

Hide thumbs Also See for MB-8N:

Table of Contents

Monitor Function

Assigning WRU-8N units individually

By assigning WRU-8N units from the tree display to monitor cells, you

can simultaneously monitor the state of multiple WRU-8N units.

Click the WRU-8N icon or user name shown to the right of the icon in the

tree display, and drag to the desired monitor cell.

Notes

• Since the tree display shows the hardware configuration of the MB-8N

and WRU-8N units, it is not possible to change the position of icons

within the tree display.

• If there is already a WRU-8N unit assigned to the cell to which you drag

the icon, the following confirmation message appears.

To overwrite the monitor cell assignment with the new WRU-8N unit,

click OK.

To cancel, click Cancel, and repeat the drag-and-drop operation.

• The drag and drop operations used for assigning WRU-8N units may not

function correctly, depending on the computer you are using. If a drag

and drop operation results in an incorrectly assigned WRU-8N unit, or

the name of the WRU-8N unit disappears, repeat the operation, or use the

Allocate button to make the assignment.

Table of Contents