Maktec MT954 Instruction Manual
  1. Manuals
  2. Brands
  3. Maktec Manuals
  4. Grinder
  5. MT954
  6. Instruction manual

Maktec MT954 Instruction Manual

Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Angle Grinder
MODEL MT954
MODEL MT958
MODEL MT959
I N S T R U C T I O N
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
DOUBLE
INSULATION
M A N U A L
006847

Advertisement

Table of Contents
loading

Related Manuals for Maktec MT954

Summary of Contents for Maktec MT954

  • Page 1 Angle Grinder MODEL MT954 MODEL MT958 MODEL MT959 006847 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

  • Page 2: Specifications

    SPECIFICATIONS Model MT954 MT958 MT959 Wheel diameter 100 mm 100 mm 100 mm Spindle thread M10 x 1.5 M10 x 1.5 M10 x 1.5 12,000 11,000 12,000 No load speed (min Overall length 256 mm 266 mm 265 mm Net weight 1.5 kg...

  • Page 3: Additional Safety Rules

    15. Disconnect tools. its intended function. Check for alignment of moving When not in use, before servicing and when chang- parts, free running of moving parts, breakage of ing accessories such as blades, bits and cutters. parts, mounting and any other conditions that may 16.
  • Page 4 23. Do not use the tool on any materials containing metallic objects ) and avoid damaging internal asbestos. parts. 24. Do not use water or grinding lubricant. 26. When use cut-off wheel, always work with the dust collecting wheel guard required by domes- 25.

  • Page 5: Functional Description

    1. Switch lever ASSEMBLY CAUTION: • Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. Installing side grip (Optional accessory for MT954,MT959) 005979 MT954 MT959 CAUTION: • Always be sure that the side grip is installed securely before operation.
  • Page 6 Installing the wheel guard 001647 Mount the wheel guard with the tab on the wheel guard band aligned with the notch on the bearing box. Then rotate the wheel guard 180° clockwise. Be sure to tighten the screw securely. 1. Wheel guard 2.

  • Page 7: Operation

    OPERATION 001651 WARNING: • It should never be necessary to force the tool. The weight of the tool applies adequate pressure. Forcing and excessive pressure could cause dangerous wheel breakage. • Continued use of a worn-out wheel may result in wheel explosion and serious personal injury.
  • Page 8 Makita Corporation 884487B987...

This manual is also suitable for:

Mt959Mt958

Table of Contents