Antenna Setting; Channel Scanning - Sharp LC-32LE551U Operation Manual

Watching TV
4 Press _1/1_ to enable/disable the Daylight Saving Time, and then press ENTER to continue to the next During channel searching:
step. ®Wait until the channel scan to complete.
®If you press ENTER, the lV will exit Easy Setup.
®If you skip this step, the channel search carl be performed in the Setup Menu. (See page 22.)
Antenna Setting
Make sure what kind of connection is made with your lV when selecting "Cable" or "Antenna".
5 Press _1/1_ to select "Cable" or "Antenna", and then press ENTER to continue to the next step. Completed
"7 After setting complete, the screen will show "Channel scan completed" message on the screen, and then
press ENTER to continue to the next step.
Channel Scanning
Channel auto search makes the IV look for all channels viewable in the set area.
6 When "Cable" or "Antenna" is selected in Tuner setting, press A/Y/ENTER to highlight "Start Scan", and
then press ENTER to start auto search.
8 Press ENTER to finish the Easy Setup.The IV will then switch to the first channel found.
• The channel scanning may take a while to complete.
• If no channel is found, confirm the type of connection made with your TV and try "Easy Setup" again. (See page
22.)
QJD" 13