Table of Contents
Advertisement
Available languages
Available languages
introduction
to Connections
In HDTV without an HD source is just an ordinary TV.To enjoy HD images on the TV, you should get HD
programming from the following:
• Over-the-air broadcasting via HD quality antenna
•
HD cable/satellite subscription
•
HD compatible external equipment.
', For information
on updating
to HD programming,
ask your cable/satellke
service provider.
For
connecting
the
TV to external
equipment,
use
commercially
available
cables.
• The illustrations
of the terminals
are for explanation
purposes
and may vary slightly from the actual products.
n Connecting
to video
equipment
or PC
Image
quality
differs
depending
on the terminal
used,
To enjoy
clearer
images,
check
the output
terminals
of
your
external
equipment
and
use its appropriate
terminals
for higher
quality
images,
.............................................
_" Pages
HD
_
_
_
HDMI-certified
cable
Quality
_
_
H_m_
10, 11
'_
_'
RCA
audio
to O 3.5
mm
stereo
minijack
cable
COMPONENT
JWOEO
]
_
@
[DE_E3
1
z
MHL
DVI-HDMI
conversion
cable
®
AUDIO
_
Pages
10, 11
DV_
OUT
_,i_, ,_
{_
_
_
comp ....
t vid....
ble
_
¥
c0_PoN _T
CO_PO,E_V_OEO
]
Audio cable
_
Standard
COMPONE_
JVIDEO
1
_
_
AUDI
O
VIDEO
Quality
Yiv
_ _
Page 10
Page 10
To view external source images, select the input source by pressing INPUT on ttqe remote control unit or on the TV.
• The INPUT
button
is only available
on LC-48LE551U
control
panel.
Example
1
Press INPUT.
®The INPUT list screen displays.
2
Press A/T
to select the input source.
®You can also select the input source by pressing
INPUT. Each time INPUT is pressed, the input source
toggles.
lV _
AVIN
_
Component
_
HDMI-I= 1
/
HDMI-2(Side)
®An image from the selected source automatically
displays.
® If the corresponding
input is not plugged in, you cannot
change the input. Be sure to connect the equipment
beferehand.
Besides powering the '[_/on and off ("Turning On/Off the Power" on page 12), you can also use POWER to
directly access the INPUT menu, select the channel, and adjust the volume level.
1
Press POWER on the control panel to turn on the rv.
2
Press POWER again to display the ONE KEY menu.
3
Do one of the following:
®To change the input source, press POWER repeatedly to select the
desired input source. Then press and hold POWER to confirm the
selection.
®To change the channel, press POWER repealedly to highlight Channel.
Then press and hold POWER to display the Channel
Up/Channel
Down submenu
and press POWER repeatedly to toggle the selection.
Once selected, press and hold POWER to select the desired channel.
m Connecting
to audio
equipment
To adjust the volume level, press POWER repeatedly to highlight Volume.
Then press and hold POWER to display the Volume
UpNolume
Down
submenu and press POWER repeatedly to toggle the selection.
Once selected, press and hold POWER to adjust the volume level at your preference.
_,
.
OeTmAL
O' 'O iiii:ii_!i
Optical fiber cable
@
Audio cable
DIGITAL
AUDIO
INPUT
o® ®L
ANALOG
AUDIO
IN
Page 11
Page 11
• For One Key function,
the channel
selection
option
is only available
when the input source
is set to "TV".
• The OSD illustrations
of the terminals
are for explanation
purposes
and may vary slightly
from the actual
products.
+ For 48" TV model
(LC-48LE551
U) is equipped
wkh 3 HDMI(HDMIq,
HDMI-2
and HDMI-3(Side).
+ For 32" & 39" TV models
(LC-32LE551
U/LC-32LE451
U/LC-39LE551
U) are equipped
with 2 HDMI(HDMIq
and
HDMF2(Side).
(D-9
- Quick Links:
- Remote Control Unit
Hide quick links:
Advertisement
Table of Contents
