Setting The Tv And Antenna Cables - Sharp Aquos LC-65XS1M Operation Manual

Quick guide

Setting the TV and antenna cables

Connecting the HDMI cable with the
fixture
1
1 Connect the HDMI cable
to the DISPLAY OUTPUT
terminal on the AVC System.
NOTE
• The POWER indicator of the AVC System lights up when the main power is turned on after connecting the Display and AVC System using the
supplied HDMI cable.
• The HDMI cable should be firmly connected. Failure to do so will loosen the cable and cause a contact failure when moving the AVC System.
This can cause result in an error message appearing on the screen without a visible picture.
Handling the AVC System
CAUTION
• Do not put a VCR or other device on top of the AVC System.
• Keep enough space above and to the sides of the AVC
System.
• Do not block the ventilation openings on the top and left side or
the exhaust fan on the right side.
• Do not spread a thick cloth beneath the AVC System or cover it with one, as this can cause overheating and result in
malfunction.
Standard
DIN45325 plug
(IEC 169-2) 75 q
coaxial cable
HDMI cable (supplied)
2
2 Attach the parts of the fixture
to the HDMI cable, pushing
the tab upward.
Do not use excessive
force when inserting/
removing the HDMI
cable. The terminal or
cable may become
damaged.
The fixture
3
anchor hole
3 Insert the tab for the fixture
into the fixture anchor hole on
the AVC System.
5cm
5cm 5cm
9