Watching Tv; Turning On/Off The Power; Initial Installation; Language Setting - Sharp LC-32LE551U Operation Manual

Watching TV
Language Setting
Select from among 3 languages: English, French and Spanish.
Press POWER on the IV, or POWER on the remote control unit to turn the power on.
POWER button
a_WER
@ @
[_ C72] CD
0000
POWER _ 1
button
* for LC-32LE551U/LC-32LE451U/
LC-39LE551U
POWER --
button
ru3
E_3
rrn
E_
rrn
* for LC-48LE551U
• The Inkial Installation starts when the TV powers on for the first time. If the TV has been turned on before, the Initial
Installation will not be invoked. For changing the settings of the Initial Installation, perform "Easy setup" on the Inkial
Setup menu on page 22.
1 Press 4/_ to select the desired language listed on the screen, and then press ENTER to continue to the
next step.
TV Location Setting
Select "Home Mode" or "Store Mode" for the location where you plan to install the TV. This product qualifes
for ENERGY STT_Rin Home mode default setting.
2 Press 4/1_ to select "Home Mode" or "Store Mode".
Press ENTER to continue to the next step.
Press POWER on the TV, or POWER on the remote control unit again to turn the power off.
® The IV enters standby and the image on the screen disappears.
• If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the AC outlet.
• Weak electric power is still consumed even when the TV is turned off.
When you turn on the TV for the first time, the Easy Setup will guide you through the setup process. Perform
the following steps before you press POWER on the remote control unit.
1. Inser_ the batteries into the remote control unit. (See page 6.)
2. Connect the antenna cable to the TV. (See page 6.)
3. Plug in the AC cord to the AC outlet. (See page 5.)
Time Zone and Daylight Saving Time Settings
Make settings for the time zone and daylight saving time where you use the TV.
3 Press 41/1_ to select the time zone where you are using the 'fV, and then press ENTER to continue to
the next step.
,, The time zone differs depending on the selected country.
®The factory preset value is the time zone for the capital of the selected country.
_-12