Attaching The Stand; Quick Installation Tips - Sharp LC-32LE551U Operation Manual

QUICK REFERENCE
® Before attaching (or detaching) the stand, unplug the AC cord, 1 Attach your antenna to the back of the television, (See page 6,)
® Before performing work spread cushioning over the base area to lay the IV on, This will prevent it from 2 Connect the AC plug for the television into the AC outlet,
being damaged, ® Place the lV close to the AC outlet, and keep the power plug within reach,
* Be sure to follow the instructions, Incorrect installation of the stand may result in the "IV falling over,
1 Confirm that there are 4 screws supplied with the stand unit.
2 Put the TV face down on a safe surface that is covered by a soft and smooth cloth,
3 Attach the TV stand to the bottom of the lV,
4 Fasten the ,I screws by using a crosshead screwdriver.
* Do not push too hard or put excessive pressure to the stand neck to avoid damage to the TV.
* Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
* After attaching the stand to the TV, do not hold the stand when you put up, set up, move or lay down the
TV.
* TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES
WiTH THE AC CORD CONNECTED.
3 When turning on the IV for the first time, press POWER on the TV.
POWER --
rrm
rrn
rrrn
POWER
* for LC-32LE551U/LC-32LE451U/LC-39LE551U * for LC-48LE551U
4
klsert the batteries into the remote control unit, (See page 6.)
* Speakers cannot be detached from the TV.
* The TV angle cannot be adjusted.
* To detach the stand, perform the steps in reverse order.
qD-5