LC-32AX5H/M/X
[2] PUBLIC MODE SETTING PROCEDURE
1. How to start Public Mode
•
There are the following two ways to get the public mode setup screen displayed.
1
1) Press the "INPUT" and "VOL (+)" keys on the set at once and turn on the power.
2) Get the password input screen displayed.
3) The 3-digit password is now verified.
The password [0] [2] [7] provides for the public mode screen. (This screen comes on with whatever adjustment process settings.)
With any other passwords, the screen changes to the normal mode.
2
In the adjustment process mode, turn on "PUBLIC MODE". Also press the "CH (
2. How to exit Public Mode
There are the following ways to quit the public mode setup screen.
Turn off "PUBLIC MODE" in the adjustment process mode. ( ) ← This way alone is not for quitting the setup screen, but for quitting the mode
•
itself.
•
Turn off the power with the "POWER" key. ( )
•
Select "ENTER". ( )
•
Move the cursor to "RESET" and press the "FLASHBACK" key. (Back to the normal mode screen) ( )
••• "PUBLIC MODE" stays on in the adjustment process mode.
••• The settings will be back to the factory ones.
3. Public Mode Setting Values
•
With the factory settings made, the public mode settings get initialized. (The adjustment process remains intact.)
Procedure
•
The input starts with the leftmost digit.
•
Use the numeric keys [1] thru [9] and [10/0] keys on the remote controller.
The other keys are not acceptable.
•
With a numeric-key input, "–" will change to " ". The input position will move one digit to the right.
•
With all the 3 digits entered, the password will be verified.
5 – 6
)" and "VOL (+)" keys on the set at once and turn on the power.