Grimac TWENTY Operating And Maintenance Instructions Manual page 19

ELE Model (Twenty) - Automatic monitoring of the level of the water in the water heater
Electronic model with microprocessor managed control panel with pushbottons that operate independently from one another. It enables varying amounts
of coffee to be dispensed using different dosing patterns. The pushbottons are identified by warning leds.
B
M 1 M 2
A
MAX
L
MIN
P
A - Cup heater switch (optional)
B - Steam knob
C - Hot water knob
D
- Water heater pressure gauge
E
- Main switch
Put the required amount of coffee into the filter holder and fit it under the unit. Next, press the key (M1...M5) corresponding to the desired delivery on the
relative keyboard. The LED turning on indicates the delivery mode selected. If the wrong selection is made, press the key again.
If the electonic control system doesn't work, it is possible to brew coffee manually by pushing the "G" button to start brewing coffee and by pushing it
again to stop it.
44
G
C
M 3 M 4 M 5 M 1 M 2 M 3
G - Emergency Start/Stop dispensing switch
L - Boiler water level indicator (optional)
N - Coffee dispensing pressure gauge
P
- Manually operated knob for supplying water (where applicable)
M1 - Coffee dispenser button for a small cup of coffee
G
B
M 4 M 5
E
N D
E
G
C B
M1 M2 M3 M4 M5
A
N D
M2 - for a big cup of coffee
M3 - for two small cups of coffee
M4 - for two big cups of coffee
M5 - Delivery Programming/Stop