Connections - Camos CM-840D Instruction Manual

8 OSD MESSAGE
OUT OF RANGE
① The screen shows this when signal is out of range
NO SIGNAL
② The screen shows
CHECK CABLE
③ The screen shows
22
this when there is no signal.
this when the signal cable is not connected.

7. Connections

1. Choose a location where you install the Monitor.
Clean the place for the Stand with cleanser and remove the
Safeguard
2. Fasten the Monitor with Tapping Screw.
3. Adjust angle of Stand and install Monitor.
Fix Knob 4. Connect each connecting cable as in the product installation
(Bracket)
reference.
Tapping screew
Safeguard tape
Stand Base
Control Knob
(Angle)
tape. And then attach it exactly where you want.
23