Canon MF244dw User Manual page 295

Direct Connection Settings
Configure settings for Direct Connection. After configuring settings, you can connect to the machine directly and
wirelessly from a mobile device even without an access point or wireless LAN router.
Use Direct Connection
Select whether to use Direct Connection. You can select <Direct Connection Only> or <Wireless LAN/Direct Conn.
(Auto Switch)> when <Use Direct Connection> is set to <On> while the Wirelss LAN connection is enabled.
Make Direct Connection (Access Point Mode)(P. 144)
Off
On
Direct Connection Only
Wireless LAN/Direct Conn. (Auto Switch)
Connection>
Conn. (Auto Switch)> when <Wireless LAN> is selected in <Select Wired/Wireless
LAN>
Time Until Direct Connection Termination
Set the time that the machine exits Direct Connection mode automatically. Can be set when <Use Direct
Connection> is <On>. Once the time set in <Time Until Direct Connection Termination> is reached,
communication between the machine and a mobile device is discontinued. Before starting a large print job, you
should set a long delay time or set the delay time to <0> (Off).
0 (Off)
1 to 10 to 60 (min.)
Connection Termination>
Access Point Mode Settings
To make detailed settings, such as authentication and encryption, enter an SSID and network key to configure
settings. Can be set when <Use Direct Connection> is <On>.
Use Custom SSID
Off
On
SSID (1-20 Characters)
Setting Menu List
<Network Settings>
<On>
<Network Settings>
<Direct Connection Settings>
Select <Direct Connection Only> or <Wireless LAN/Direct
<Direct Connection Settings>
Set time to disconnect
289
<Use Direct
<Time Until Direct