Checking whether the settings are correct
Make sure that the Remote UI screen can be displayed with your computer (
a computer is not available, you can check the connection by using the operation panel (
Network Connection(P. 190) ).
Testing the Network Connection
1
Press
.
2
Use
/
to select <Network Settings>, and press
●
If a screen for entering a PIN is displayed, enter the PIN with the numeric keys and press
the System Manager PIN(P. 229)
3
Select <TCP/IP Settings>
4
Enter the IPv4 address of another device on the network, and press
●
If a proper connection has been established, the result is displayed as shown above.
LINKS
Setting IPv6 Addresses(P. 191)
Viewing Network Settings(P. 194)
Network (MF244dw / MF232w)
<IPv4 Settings>
<PING Command>.
190
Starting Remote UI(P. 273) ). If
Testing the
.
.
.
Setting