Canon MF244dw User Manual page 151

Can Be Used Conveniently with a Mobile Device (MF244dw / MF232w)
Connecting from a mobile device
●
●
● When the machine is in Direct Connection mode, it is possible that you cannot connect to the Internet
depending on your mobile device.
● If <Use Custom SSID> is <Off> when the machine is in Direct Connection mode, only a single device can be
connected at a time.
● If wireless connection from the mobile device is not performed within 5 minutes while the SSID and network
key are displayed, the connection waiting state terminates.
● If while in communication by Direct Connection, a duration when there is no data transmission between the
machine and the mobile device lasts for some time, the communication may terminate.
● The machine's SSID and network key are changed each time the Direct Connection procedure is started.
● While in Direct Connection, sleep mode is not as effective at saving power.
● If you use the Direct Connection, do not set the IP address manually on the mobile device. Doing so may
prevent proper communication after using the Direct Connection.
Based on the SSID and network key displayed in the display, make wireless LAN
connection settings for connecting to the machine.
The screen below appears in the display during the connection process.
<Disconnect>
Stops the Direct Connection procedure. When printing, scanning, or other
desired operation is complete, select <Disconnect> and press
the connection.
<Connection Information>
You can view the information on the Direct Connection being proceeding.
145
to terminate