Installation Procedure; Way Cassette Type - Toshiba TCB-PCNT30TLE2 Installation Manual

• For installation of "1 : 1 Model" Connection Interface board and removal of relay wire, be sure to wait for a while
(approx. 1 minute) after turning off the power supplies of the air conditioner and the collective control devices.
If not doing so, "1 : 1 Model" Connection Interface board may be damaged.

4-Way Cassette Type

In case to install 1:1 Model Connection Interface, be sure to purchase also "TCB-PX30MUE"
sold separately. For installation, 1:1 Model Connection Interface board box of "TCB-PX30MUE"
is necessary.
RAV-SM ∗∗ ∗∗ ∗∗ ∗∗ ∗∗ 4UT∗ ∗ ∗ ∗ ∗
No.
1 Attach spacer (A)
box of the "TCB-PX30MUE" sold separately, and then install
P.C. board .
1
2 Cut off a part of the bell mouth, which is enclosed with dotted
line shown in the right figure.
3 Mount terminal block (U3, U4)
for terminal block as shown in the right figure of the electric
parts box, with terminal block fixing screws (M4 × 14
Stick the attached terminal nameplate
block along direction shown in the right figure.

Installation Procedure

Procedure
to 1:1Model Connection Interface board
6
at the fixing plate position
2
at near the terminal
10
CAUTION
1:1 Model
Connection Interface board box
(Attached to the TCB PX30MUE)
) .
8
Direction of Direction of
nameplate nameplate
10 Terminal 10 Terminal
nameplate nameplate
5
Details
6 Spacer (A)
1 P.C. board
Bell mouth Bell mouth
Cut-off part Cut-off part
Fixing plate Fixing plate
for terminal block for terminal block
Upside Upside
8 Screw to fix 8 Screw to fix
terminal block terminal block
2 Terminal block 2 Terminal block
(U3/U4) (U3/U4)