Bosch FAP-O 500 Series Product Information page 13

Product Information 500 Series LSN Fire Detectors (EU)
In the case of the optical FAP−O 500 detector, the sensitivity of the optical sensors can
be set on three levels. Depending on the operating location, the optical sensor of the
detector is thus adjusted to the environmental conditions. For fire detection, also the
time behavior of the fire characteristics is evaluated. This is very different from the time
behavior of the disturbance variables.
FAP−O 500(−P)
Operating location and recommended setting for optical
detector (FAP−O 500) selectable via the programming detector (FAP O 500) selectable via the programming
software
Office (smokers) / waiting room / restaurant / conference room
Conference room / waiting room / exhibition hall
Warehouse with vehicle traffic
Production facilities
Office (daily operation)
School / kindergarten
Theaters / concert halls
Office (no traffic)
Computer room
High−board warehouse without vehicle traffic with internal com-
bustion engines
For execution of the function test for the FAP−O 500 and FAP−
OC 500 detector, the detector must be switched to test mode. This
can be carried out via the fire panel or via the reed switch at the de-
tector with the help of a magnet.
Page 13
PI − 34.70 en
Sensitivity Sensitivity
O unit
low
low
low
low
medium
medium
medium
high
high
high
BDL−F.01U.025.876
A5.en/ 02.02.2006
ST−FIR/PRM1 / zab