Installation Instructions - Parkray consort 9 CE V.II Installation And Operating Instructions Manual

Multifuel central-heating stove

Hide thumbs

Table Of Contents

Table of Contents

These instructions cover the basic principles to ensure satisfactory installation of the stove,

although detail may need slight modification to suit particular local site conditions. In all cases

the installation must comply with current Building Regulations, Local Authority Byelaws,

European and national standards and other specifications or regulations as they affect the

installation of the stove. It should be noted that the Building Regulations requirements may be

met by adopting the relevant recommendations given in British Standards BS 8303, BS 6461 and

BS 7566 as an alternative means to achieve an equivalent level of performance to that obtained

following the guidance given in Approved Document J.

Members of the following schemes may self-certify the installation of this stove. If the installer is not a

member of one of these schemes, your local building control department must approve the installation.

Scheme

APHC (Association of Plumbing and Heating

Contractors (Certification) Limited

Building Engineering Services Competence

Accreditation (BESCA Limited)

HETAS Ltd (Heating Equipment Testing and

Approval Scheme)

NAPIT Registration Ltd

NICEIC Group Ltd

Handling

Adequate facilities must be available for loading, unloading and site handling.

Fire Cement

Some types of fire cement are caustic and should not be allowed to come into contact with the skin. In

case of contact, wash immediately with plenty of water.

Asbestos

This stove contains no asbestos. If there is a possibility of disturbing any asbestos in the course of

installation then please seek specialist guidance and use appropriate protective equipment.

Metal Parts

When installing or servicing this stove, care should be taken to avoid the possibility of personal injury.